BCD Chemie at the European Coatings Show

We look forward to welcoming you at the European Coatings Show 2023 from 28 to 30 March.

Visit us in Hall 3, booth 3-434 and find out about our broad portfolio of raw materials for the Coatings, Construction, Adhesives and Sealants sectors.
In addition, we will show you what added value we offer as a chemical distributor for your company and how you can become more sustainable with our help.

We look forward to meeting you!

Cooling lubricant additives

Metal working fluids, especially the water-miscible metal working fluids, are complex, multi-component systems that have to meet a wide range of requirements.

The main components are the base oil, which has a lubricating effect, and water, which provides good cooling.

To make oil and water compatible, surfactants are used. In addition, various standard and special amines are used as pH buffers and for corrosion protection. To prevent foaming of the metal working fluid, antifoams are used. Wetting agents improve the wetting of the metal by the metal working fluid and dispersing agents ensure that solid particles are kept in suspension, do not settle and do not lead to clogging.

Solvents

Solvents are liquids that are capable of dissolving solids.
Solvents are usually understood to mean organic solvents – strictly speaking, however, water is also a solvent, since it dissolves salts, for example.
Typical organic solvents include alcohols, esters, ketones, glycol ethers and aliphatic and aromatic hydrocarbons.
When selecting solvents, the principle of “like dissolves like” must be observed, i.e. polar substances dissolve in polar solvents, nonpolar substances in nonpolar solvents.

Surfactants

Surfactants are intermediaries between different worlds. They are needed to make water-insoluble liquids compatible with water (emulsions) or to detach dirt particles from textiles and prevent them from settling again.

Surfactants consist of a water-loving (hydrophilic) part and a water-repellent, oil-loving (hydrophobic or lipophilic) part. The hydrophilic part of the surfactant molecule is in the water, while the hydrophobic part is in the water-insoluble liquid or on the dirt particle.

Surfactants can also stabilise foams. If this is undesirable, the foam can be destroyed by the use of antifoams, with PU foams (e.g. for mattresses, shoe soles and foam boards) the effect is desired, so here special silicone surfactants are often used.

Performance chemicals

Performance chemicals, in contrast to industrial chemicals, are products that have a more complex structure and where the focus is on an effect rather than the chemical structure.
In the case of rheological additives, for example, the control of the flow behaviour of a liquid is important; the chemical structure of the rheological additive is of secondary importance. For this reason, there are many different rheological additives that differ in chemical structure, such as cellulose ethers, xanthan gum, layered silicates, and fumed silica. Typical industrial chemicals include acids, lyes, salts and solvents such as alcohols.

Silicones

Silicones is the name for a group of polymers whose basic structure consists of silicon and oxygen. The basic structure can be a linear chain, branched or forming a three-dimensional network. The raw material base for silicones is silica sand.
The silicon atoms still carry hydrocarbon residues, which gives silicones a position between organic and inorganic chemicals.
Silicones are also often referred to as siloxanes. If the hydrocarbon residues are methyl groups, the molecule is called polydimethylsiloxane (PDMS). The corresponding substance group is called silicone oil.

Silanes

Silanes are bifunctional molecules that combine two properties.
The raw material base for silanes is silica sand. Silanes carry anchor groups with which they react with the surface of mineral substrates, glass or metals so that they sit firmly on this surface.
The second, the functional group, determines the properties that the silane brings to the surface. If the silane carries an alkyl rest as a functional group, the surface acquires water-repellent (hydrophobic) properties. If the functional group is, for example, an amine, an epoxide or carries a double bond, a subsequently applied coating can react with this functional group. This improves the adhesion of the coating to the substrate, and is also referred to as adhesion promoter.

Contract blending of chemicals

Many manufacturers of solid or liquid products do not have the production capacity or do not see it as their core business to dissolve solids in liquids, mix liquids or produce formulations. In individual cases, it may also be a matter of a new product of which it is not yet possible to judge whether it will be accepted by the market or for which a capacity expansion has not yet been implemented.
In all these cases, manufacturing is outsourced to contract blending service providers who specialise in producing appropriate blends quickly and to a high quality.
The BlendServ^® department is the service provider for the production of blends within BCD Chemie.

Contract filling of chemicals

Many manufacturers of solids or liquids do not have the ability to fill products into small or large containers – from 1-liter bottles, to 200-liter drums, IBCs, and even tank trucks. In such cases, in order not to have to invest in filling plants that are not utilized, the help of contract fillers of chemicals is sought.

These service providers have various filling lines on which the products can be filled and labeled accordingly.

The BlendServ^® department is the service provider for contract filling of chemicals within BCD Chemie.

Additives for coatings

In principle, inks and coatings consist of four groups of substances:
The lacquer binder forms the coating film and protects the surface from environmental influences.
The second group of substances are the pigments, which give a coating its colour or are added for technical purposes such as corrosion protection. In the dried coating, the pigments are surrounded by the lacquer binder, which fixes them to the surface.

Additives for coatings improve the properties of the binder and are necessary to produce a high-performance coating.
The fourth group are the solvents, these can be organic solvents or water. They are necessary so that the coating can be well applied to the surface. The solvents then evaporate and the coating film with pigment and additives remains on the surface.

Additive for coatings include rheological additives to control flow behaviour and dispersing additives to keep pigments and fillers well suspended and prevent agglomeration of these solids. They also include antifoams, which on the one hand prevent the formation of foam and on the other hand destroy created foam that leaves an unsightly surface after the coating film has dried, wetting agents, which ensure good wetting of the surface, and adhesion promoters, which ensure good adhesion of the coating film to the surface.

Antifoams

Depending on your requirements, foam may be desirable or undesirable. Desirable foam is, for example, in the beer glass, on the cappuccino, or else in foams consisting of cured PU foam, as in the case of mattresses.
However, foam is often undesirable in chemical or process engineering processes, as foam formation can cause a vessel to overflow or the overfill protection system to trip, interrupting production.

The formation of foam is also undesirable in inks and coatings, as it leads to an unsightly surface.
The liquid lamella, which encloses the air in the case of foam, is stabilized by surface-active substances such as surfactants. Antifoams are incompatible with the liquid to be defoamed and form small liquid droplets that migrate into the foam lamella and destroy it – the lamella bursts and the foam disappears.

Cellulose ethers

The raw material for cellulose ether is cellulose, which is obtained either from cotton linters or from wood. Cotton linters are particularly pure and consist of almost 100% cellulose. Coniferous wood is mostly used as wood pulp, as its wood fibers are longer than those of hardwood. Wood contains just under 50% cellulose, which must be separated from the accompanying substances (lignin). Pure cellulose is chemically modified to obtain cellulose ethers.

Cellulose ethers are, for example, methyl cellulose and carboxymethyl cellulose. They are used, among other things, as rheological additives in building inks as well as in building in cementitious plasters and tile adhesives as well as in gypsum systems. Only the use of cellulose ethers has made modern and easy-to-use high-quality plasters and tile adhesives possible.

Rheological additives

Rheological additives are used to control the flow behaviour of liquids or pastes.
They are more than simple thickeners that make a liquid more viscous: They can be used to selectively set different flow characteristics.
In paints, for example, the pigments must not settle during storage, which necessitates a high viscosity of the paint.
Storage stability is further enhanced by special dispersing additives, which contribute to better stabilization of the pigments. If the paint is applied, the viscosity should be lower so that it is easier to apply, subsequently flows and inconsistencies due to the brush stroke or roller pattern are avoided. In the end, the paint should be viscous again so that it does not run off on vertical surfaces.
Another example is greases: In these, oils are made so viscous by adding a rheological additive that they do not flow out of open systems (e.g. ball or roller bearings), as it would be the case with oils, for example.

White pigments

The most important white pigment is titanium dioxide. Compared to other white pigments such as zinc oxide, barium sulfate or lithopone, it has a much higher refractive index and therefore appears whiter. Titanium dioxide is practically everywhere where products need to be white: in wall paints, in plastics, in high-quality papers, but also in toothpaste. Titanium dioxide is used in two different forms, as rutile and as anatase. Rutile is the slightly harder form, anatase the softer. The latter is used where abrasion plays a role.